3.5 ULTIMATE COMPLETE TRIGGER KIT FOR GLOCK GEN 1-5
GHO_UTK - ULTIMATE 3.5 COMPLETE TRIGGER KIT Gen 1-5
For all GLOCK's Gen's 1-5** * Everthing in kit will work on Gen 5 for the exception of the trigger spring. **This does not fit the 42 or 43. See category specific for the 42 and 43 for the G42/43 Edge or G42/43 PRO that is made for those models.
We have combined our polished Ultimate 3.5 LB. Drop-in Trigger Connector withFour Premium Springs
Fine tune your trigger pull, feel and weight all in one kit!
We combined all the parts necessary to give you best trigger pull possible. You save a few bucks and get everything in one shot! The Kit includes 5 parts:
Please Note that all trigger kits include the target setup and self-defense set up
1.) 1-Ultimate 3.5 LB. Drop-In connector
2.) 1- 6.0 lb Trigger Spring- Not used on Gen 5 Glocks
3.) 1- 4.0 lb Firing Pin Spring (Target/Sport Configuration)
4.) 1- 6.0 lb Firing Pin Spring (Self-Defense Configuration)
5.) 1- Reduced power firing pin safety spring
Please Note: The 4.0 lb Firing Pin Spring may cause light primer strikes in some pistols this is the Target/Sport configuration.
For Self Defense or in a 10mm/45 caliber Glock we recommend the 6.0 lb firing pin spring.
Showing reviews 1-10 of 54 | Next
Best Glock Trigger Function I've Experienced
Posted by Johnny Bullington on Oct 9th 2020
I installed the 3.5lb connector, reduced strength firing pin safety spring, and the 6lb Striker spring on my gen 3 Glock 20. I took it to the range yesterday and enjoyed my best-ever Glock shooting experience. Adding the Ghost parts turned a very good smooth trigger pull into an exceptional trigger pull. It is exactly how I like it without compromising concealed carry dependability. And it didn't break the bank. I had considered upgrading the trigger shoe and bar but I see no need to do that after the polish job and installing the Ghost parts. I'm a very happy customer.
Posted by DK on Sep 9th 2020
Changed the OEM connector bar, plunger spring and firing pin spring using the Ghost parts. Not sure its down to a 3 1/2 pound trigger but the gun is now actually fun to shoot. I used the 4 lb firing spring and ran 300 or so rounds of different ammo thru it and no light hits.
On a G44
Posted by Unknown on Aug 20th 2020
You can only use the connector and plunger spring from this kit on a G44 but I have other Glocks for the left over springs. The connector and plunger spring only reduced the pull 1 lb from 7 to 6 but noticeably enhanced the feel. Maybe someday they will have a reduced power trigger spring for the G44; it could use it. Ghost makes a good product and my G43 has a much better trigger from the kit I installed on it earlier.
Easy Change for a nice feel
Posted by Harry on Aug 20th 2020
Changing the parts was pretty easy. The trigger pull know is much better in my opinion
Posted by Charles Helmich on Aug 18th 2020
Another quality made Ghost product. Best connector and spring kit you can get!
Posted by Jerry on Aug 17th 2020
After working with Oliver to install the Evo Elite 3.5 connector and spring kit in my Glock 26-4 and seeing the amazing improvement in the trigger response I was sold on Ghost products. The day I ordered my Glock 44 I called Ghost to get Oliver's recommendation on the best trigger kit. He suggested the Ultimate 3.5 which I ordered and installed. The difference that kit made is unbelievable. Thank you again to Oliver.
Smoothed and lighten the trigger pull on my G19
Posted by Unknown on Aug 14th 2020
No problems with the 4lbs trigger spring. Gun goes bang every time I pull the trigger. Shot a IDPA match right after installing it.
A requirement for the G44
Posted by Sandy Keathley on Jun 5th 2020
Glock's new model 44 (.22 cal) is a very fine, well-designed handgun. It is the size of the G19, and handles very much like it, but the trigger has quite a hard break to it. I am used to replacing the connector on all Glocks, but it was unclear (even from Ghost and Apex) if their kits would work on the G44. I found a video where someone used a Ghost kit on this model, so I got the kit. It does work very well. The trigger spring does not apply to the Gen 5, but I used the connector and the softer striker spring. The trigger feels much nicer, and I have had no problems with soft primer strikes, at least with Aguila and CCI Standard. I consider this kit to be essential for this gun.
Made my new Glock 19 fire like a champ
Posted by Brian H. on May 30th 2020
This product blew me away!!! Was told about Ghost connectors and products by many friends! Local Floridian and love they a Florida product, made my trigger feel so good, will get more from you all, wanna try out more connectors and see which I like more, the ultimate feels great tho. Good Job GhostInc.
Talk about BANG for the buck!
Posted by Blake Cyrus on Jan 13th 2020
I thought I was impressed with the 3.5lb connecter! When I put the Ultimate Spring kit in my G20 10mm (which I use to hunt with) I was pretty d@mn impressed with the results! We all know that factory Glock triggers leave plenty to be desired, tighter groups are achieved without even putting forth effort! I chose to go with the lighter 4.0lb spring and have zero complaints so far!
Showing reviews 1-10 of 54 | Next