C.A.T. 4.5 GEN 1-5
Trigger connector for all GLOCK's Gens 1-5*
*This connector does not fit the 42 or 43.
See category specific for the 42 and 43 for the G42/43 Edge and G42/43 Pro that is made for those models.
This is a semi drop-in 4.5lb. TCT connector that will eliminate most of the accuracy robbing over-travel that all Glock pistols have.
This will shorten the Action and reset faster than stock. Some Glock's may require the shortening of the tab, function without the need of trimming in 99% of all Glock's tested.
This 4.5lb Semi-Drop-In Combatives Application Trigger (CAT) connector offers a smooth trigger action insuring the muzzle stays on target during a critical stress, pandemonium filled fight. The Ghost C.A.T. gives you cat like response to the lethal situations. Why a semi Drop-In? We decided that the fastest and safest way was to manufacture a patented Trigger Control Connector that offered the advantages of a custom fitted trigger without the expense of gunsmith services and related down time. The C.A.T. gives a custom feel with less over-travel than a drop-in due to the pre-cut trigger control tab. Short initial action combined with reduced over-travel results in the best drop-in combative trigger available.
Showing reviews 1-10 of 13 | Next
What Glock should be doing with their triggers.
Posted by Unknown on Nov 29th 2021
When it comes to glock’s there’s one thing they do well and that’s making every Glock feel consistently the same, but they leave a lot of room for improvement, especially in the trigger. The stock Glock trigger has some merits but it’s a heavy trigger usually breaking around 6 to 6.5 lbs. It also has some creep and a little bit of over travel. This connector fixes all of these things and then some. To start out I already had the vickers tactical flat face trigger shoe, which I would also recommend. Installation of the connector was easy and strait forward, I didn’t need to fit the connector, but that’s not to say everyone will have a similar experience. I started off with using the stock firing pin spring. The first thing that was evident was the pull weight was much lighter, as well as the over travel was eliminated. I personally felt that the pull weight with the stock firing pin spring was to light, although the wall was perceivable it was to easy to pull through it. So I replaced the firing spring and safety plunger springs, lightening the plunger and making the firing pin spring heavier. This made the trigger exactly what I was looking for. The take up was short very with a perceivable wall and a clean consistent break. I would say in this configuration the trigger was probably breaking around 4.5 to 5 lbs, the flat face trigger shoe will drop your pull weight some because of science. Now where I feel this connector really shines is it’s reset. The reset is short with no take up after reset, when it resets it’s on the wall so this trigger can be worked very fast with some practice. Ghost made a solid connector here and I have already made some recommendations to people. The trigger connector says everything it said it would and beat my expectations. To put it in perspective I am thinking about swapping it into my shadow systems mr920 which already has a pretty great trigger. Also I need to mention that customer service was top notch, I originally was sent the wrong connector and they expedited the correct one to me.
Posted by Unknown on Oct 7th 2021
The trigger pull on my Glock 19 has never felt so much better. Cheap and easy to install. Highly recommend this part for Glock owners.
Posted by Ted S. CPO (SW/SS) USN on May 27th 2021
I reviewed & evaluated dozens of other Glock 19 Gen 5 drop-in connectors, for my EDC weapon & this Ghost CAT is absolutely fantastic. Superior to all the others manufacturers in the market place. Super easy to install, perfect fit, beautifully crafted, silky smooth trigger pull, outstanding reset/take up. Exactly what is needed.
I’ve added a few other upgraded parts, I.e. springs-tungsten guide rod-NP3 plunger & spring, NCI extractor-extended slide stop/extended slide release, custom rear slide plate.
However, this is an absolute must have item at 4.5 pound the Ghost C.A.T.
First Class Hardware
Posted by Odysseus on Jul 31st 2020
Ghost Inc. 4.5 lb connector is extremely smooth and fit in my G19 just right. Five stars to Ghost Inc.
Great connector for carry.
Posted by Aaron on May 11th 2020
Smoothed and lightened trigger. Feels great when added to stock trigger parts. Think this may be the perfect connector to use in EDC guns if you decide to upgrade over stock.
Great for a carry pistol
Posted by David Shimko on Jan 18th 2020
I dropped this in my polymer 80 build, with standard parts that were treated using the $.25 trigger job. The connector made the trigger pool a little lighter, but much more crisp, with a more definite and shorter reset. adding the 6 pound trigger spring and lightened firing pin safety spring will lighten the pull even more. Adding these three things to my pistol brought the trigger pull from 6.75 pounds to 5.5 pounds. I will leave it as is, and use it for concealed carry. Perfect.
Posted by Maven on Dec 1st 2019
Dropped right in with no modification. Really improved the trigger. I like the fact that I can get a better trigger without a lighter trigger pull. For carry, I prefer a minimum of a 4 lb trigger pull. Trigger is now shorter and more crisp. As time goes by and I shoot more, it will only get better.
Posted by Unknown on Sep 22nd 2019
Quick easy change out! Love the short reset.
Great blend of several connectors Ghost offers.
Posted by S H Moore on Jun 5th 2019
I am very happy with it. I used it in a large frame Glock but I am reviewing it here as I feel more people with me shopping for the small frames and want them to know it is great. . The CAT remains very strong in both audible feedback as well as tactile in feel. While I don’t think you will hear a reset in live fire this does help during dry fire practice. It keeps these two (to me) very important features on a combat/defensive firearm, while giving almost everything you get from the lighter connectors in terms of lightness (in regards to factory) and simply better trigger feel overall. In my builds I have going CATs will go in them all. It’s by far my favorite. Nice enough for a range gun and heavy smooth enough for other usage.
Stands behind product
Posted by John on Aug 17th 2018
I had a problem with the C.A.T connector and notified Ghost Inc. Oliver telephoned me and personally resolved the issue. Service doesn't get any better than that.
Showing reviews 1-10 of 13 | Next