G42/G43/43X/48 PRO CONNECTOR
G42,G43,G43X & G48 PRO CONNECTOR
THIS IS THE SAME CONNECTOR FOR THE 42/43/43X & 48!
When you first receive this connector, install it first before trimming/reducing. Apply extra pressure and see if it releases the firing pin. If it does with extra pressure you will trim down very little to get a clean smooth release.
GLOCK42, 43, 43X and 48'S FIRST FITTED OVER_TRAVEL ELIMINATING CONNECTOR AVAILABLE NOW
FIRST AND ONLY BUMP FREE TRIGGER CONTROL TAB CONNECTOR FOR THE GLOCK 42, 43, 43X and 48
This is the connector long sought after by Glock 42, 43, 43X and 48 Enthusiast everywhere. This is the Smoothest Connector on the market today.
GHOST, Inc G42/43 PRO Trigger Connector for Glock 42, 43, 43X and 48's!
This one fits only Glock 42, 43, 43X and 48.
- Average Reduction in trigger weight is 2.5 lbs.
- Lightest Stage Free Trigger
- Smoother Than any other Trigger
- Shorter Pull Eliminates Over Travel
- Perfect Function
- Fits Glock 42, 43, 43X and 48
- Ghost Lifetime Guarantee
- Minor Fitting Required
The GHOST G42/G43 PRO is the best self-defense & Target trigger control connector Ghost makes!
The G42/G43 PRO is Smoother, Lighter, Shorter and eliminates trigger Over-travel! These attributes give you the fastest most accurate first shot hit advantage of any self-defense Glock style trigger.
HIT FIRST & FAST WITH THE PRO
The G42/G43 PRO fixes the Glock bump or glitch, this is the pre-travel resistance you feel and must overcome when the trigger bar bumps into the connector. This bump causes you to apply excessive force and will move the pistol off target. Another thing the G42/G43 PRO corrects is trigger over-travel; the excessive movement of the trigger after the pistol fires. Over-travel causes the pistol to move off of alignment with the target, making your shot go low and to one side.
G42/G43 PRO KEEPS YOU ON TARGET
The G42/G43 PRO is the best self-defense connector made! We believe that this trigger control connector makes all others obsolete. Once you try it, we know you will agree! Minor fitting required.
This Connector is For CCW Self-Defense.
Recommended: A gunsmith or armorer should install this connector.
PLEASE NOTE : THIS IS NOT A DROP IN TRIGGER CONNECTOR: Small flat Swiss file needed to fit.
Keeping the G43 - Forever!
Posted by Edward Davis on Jul 15th 2019
I looked at different connectors that offered a lighter pull, and decided on the Pro Connector. Glad I did! It didn't take long to file it down to where the trigger broke and racked properly. I cannot believe how a simple little part like this makes the dreaded G43 trigger much smoother, and much better. Just the Pro Connector alone made my trigger a lot better, and a lot easier to pull! There's a noticeable difference in "Over Travel" as well. I never realized how “Over Travel” can affect your point of impact. Now, the muzzle literally stays straight, and doesn’t dart to the right because over travel. This really does improve shot accuracy. Because of this Ghost Pro Connector, and the MagGuts +2 extension, I love the G43 more so now ...than I ever have. Keeping it Forever!
Also, I want to thank to thank Oliver for all his advice, and to thank Ghost for making this fabulous product. Ghost stands by their connectors with a Life Time Warranty. It's very comforting to know that IF your connector ever malfunctions, Ghost will send you a brand new connector. You cannot beat that policy at all! Just order this connector. You’ll be glad you did.
Love my G43 - Forever!
Posted by Edward Davis on Apr 26th 2019
My G43's born on date is April, 2015. The trigger was the hardest damn pulling stock trigger - ever made! No kidding. Thought about getting rid of it, but talked to Glock about it, and they informed my G43 was one of the first out the door, and there were issues with it. He told me there was a different trigger bar & connector offered by Glock now. He sent a whole new trigger bar & connector to me free of charge. (Love Glock). When it arrived, I did the .25 trigger job on it. It was a little easier to pull, but still, I wasn't truly happy with it. Looked at many different connectors that offered a lighter pull, and decided on the Pro Connector. Glad I did! It didn't take long to put it in and to file it down to where the trigger would break, and rack properly. Was very surprised at how much pull it took off the trigger. Very damn smooth and light!
After putting 200 rounds through it without a single hiccup, I can honestly say this Ghost Pro Connector (and Glock stock trigger bar)... was the BEST CHOICE I made! I'm so glad I didn't have to spend money on a the fancy new trigger bars out there. Just the Pro Connector alone made my trigger a lot better, and a lot easier to pull! There's a HUGE noticeable difference in the "Over Travel" as well. I never realized how over travel affects your aim. When pulling the much lighter trigger now, the muzzle literally stays straight, and does not dart over to the right because the over travel. This allows me to get another shot off with more accuracy.
I totally LOVE this Pro Connector. I cannot believe how a simple little part like this makes the dreaded G43 trigger much, much smoother, and much better. Because of this product, I am in love with my G43 more so now... than I've ever been. I'm more confident with it, and will keep it FOREVER! It's very damn hard to get rid of a gun when you shoot a spray can off a T-Post at 28 yards! Not once; but Twice - literally 2 different shots. Didn't think I could do it, but did. She's one accurate little Monster! And definitely a keeper now. She's with me Forever from this moment on.
I REALLY LOVE this Pro Connector. Thank you Ghost for making it, and thank you Oliver for all your advice. I also have to mention the life time warranty you guys put on it as well. It's very comforting to know that IF it were to ever mess up, you guys will replace it. But I really don't see that happening. It's very well made, and once you follow the directions, and install it correctly... it's there to stay! I cannot wait to go shoot my G43 more, and get better with it. I'm gonna try that spray can at 35 yards next time.
Pro Connector in Glock 43X
Posted by firstname.lastname@example.org on Mar 7th 2019
I’m very happy with this connector! It pairs very well with the Overwatch Precision TAC trigger! Break is way more crisp when paired with that trigger stated above. I only took the tab down until I could pull the trigger, and I feel it made ‘the wall’ feel like it was cut in half. It’s made it so I can pull the trigger without disturbing the front sight, but the wall is still there enough so I feel comfortable having it in my EDC gun. It also did make that ‘bump’ or ramping up feeling before the wall go away. Very pleased! I will be putting one in my G19 as well!
Posted by Caleb M Becker on Mar 2nd 2019
Installed this into a G48. Took about .015 off of the TCT to get the striker to reliably release. Overtravel is now essentially nonexistent and has tightened up my groups by about an inch @ 10 yards. Front sight post does not move AT ALL when the trigger breaks. While the trigger still "stacks", the break is more of a rolling break. I have no issue with a rolling break whatsoever, however, I would have loved to have kept the crisp break as I prefer it for CCW. Trigger went from approx 5.5-6 lbs to 4.5-5lbs. (4.5 at the tip of the trigger/5 in the middle of the trigger). After initial testing, I installed an Overwatch Precision DAT trigger shoe with OEM trigger bar and this is now one of my favorites to shoot at the range as well!
G42/G43/43X/48 PRO CONNECTOR
Posted by Unknown on Feb 11th 2019
Our Firearm Service & Repair Facility installs a LOT of Glock Connector Upgrades! 90% are units that need (or should be) fitted to each of our Customer's Glock platforms. Lately we have been installing a number of the G42/G43/43X/48 "Pro" Connectors, given the introduction of the 43X and 48. Customers love the improved feel and reset of their triggers, and we have not found any other product so consistently manufactured relative to quality.
Definately lighter pull
Posted by Mark Nix on Sep 14th 2018
Pro connector reduced trigger pull by about 3 lbs. The back wall is very light.
As soon as you hit the wall. Fire is right there. Much smoother pull. Jus would like to see less trigger travel. Otherwise, outstanding.
Significantly improves trigger feel
Posted by Austinthevet on Jan 10th 2018
I installed this in a G43, took about ten minutes including filing the connector to fit. There was minimal filing needed, I took off less than 1/100th of an inch to get the striker to release.
This connector improves the trigger feel immensely, and makes it much more consistent.
Ghost Inc had fast shipping, plus all the swag they send with purchases is always a plus.
Posted by Unknown on Dec 23rd 2017
Very easy to install, take your time and check often. Dropped and smoothed out the trigger pull down 2 pounds. You can’t go wrong.
No More Hump
Posted by email@example.com on Oct 30th 2017
All in all, the trigger is MUCH smoother. No more of the notorious Glock “hump” that they’re infamous for. That being said, I was hoping it would take up some travel and reduce the pull a little more.