GHO_6_5_FP: 6.5 lb. Super Duty Extreme Firing Pin Spring for Glocks GEN's 1-5
This is a 6.5 lb. Super Duty Extreme Firing Pin Spring
FOR GEN 1-5. This spring is manufactured by Ghost Inc. This Super Power Striker/Firing pin springs are a must for all 45 ACP & 10mm GLOCKS. These bigger guns use 9% heavier firing pins but come with the lighter weaker 9mm firing pin springs which will eventually cause light primer strikes. These springs are also highly recommended for all other GLOCK models to insure the strongest primer strikes insuring that your pistol fires under the most extreme conditions.
You will feel about 1/2 pound heavier difference in your trigger pull weight. This spring is manufactured by Ghost Inc.
This spring can be used along all of our manufactured connectors.
Showing reviews 1-10 of 12 | Next
Great product and fast shipping!!
Posted by Keith Flick on Sep 9th 2021
Fixed my problem no doubt. Went from no fire to firing every time. For anyone who has a soft strike problem...this spring will definitely fix that problem.
Very good quality springs
Posted by Greg R on May 3rd 2021
The springs have a nice coating on them. They only increase the trigger pull slightly and with todays really bad ammo available, helps with bad primers.
6.5 super duty striker spring 10pk
Posted by GhettoCountryPatriot on Mar 20th 2021
I initially ordered these springs to fix a light primer strike issue with my g43 build. Turns out it was just really really cheap low quality ammo I was using. I ended up swapping out all the striker springs in all my Glock pistols with these 6.5lb super duty springs. So far so good. I have ran 200 rounds of 115gr blazer fmj 9mm, 20 rounds 95gr +p Underwood extreme defender 9mm, 5 rounds 147gr +p Buffalo Bore Outdoorsman hard cast lead 9mm and 50 rounds 124gr +p Federal HST JHP with absolutely no issues. I would strongly recommend these springs and would keep a couple in your parts bin for later replacements.
Great product and fast shipping
Posted by Timothy James Red on Jul 4th 2020
quality products at a great price. Shipped quickly. Perfect for my canik tp9sfx and my canik elite sc.
Perfect for my Canik TP9SFX
Posted by Unknown on Jun 9th 2020
Took my Canik out to the range with the upgraded spring and it ran really well. Trigger is perfect with this.
Posted by Marco Rodrigues on Dec 30th 2019
Glock 17 gen 5. I been having problems with it hateing my reloads would go bang then click bang click. Factory loads we're ok. Changed the spring and put 300 rounds of reloads thought it in 1 day with no problems. This is the spring if you reload with hard primmers like cci
Posted by Unknown on Jan 22nd 2019
these glock striker springs help lighten trigger in canik tp9sfx along with other changes.
Cures Light Strikes on CCI Primers
Posted by Tom W on Aug 21st 2018
I was having some issues with light strikes on CCI primers with my G42. I no longer trusted the gun and then I thought, my other Glocks have 6.5 striker springs. I changed over the old standard G42 striker spring to the 6.5 pound spring, and there is Glock reliability again even with the harder CCI primers.
Firing pin spring. Glock 19.
Posted by Art Smick on Jun 21st 2018
Did the job, good spring. Maybe a little too strong; I get an indent. I'll keep watching it. Will shop at Ghost again!
Works for canik sfx
Posted by Lee on May 6th 2018
It's works great on a canik sfx
Showing reviews 1-10 of 12 | Next