PRO 3.3 GEN 1-5

Previous | Showing reviews 11-20 of 22 | Next

11. So easy it’s almost a drop in connector.

    Posted by sb5610@aol.com on Aug 9th 2019

    So easy it’s almost a drop in connector.
    Takes no time and little effort to get perfect contact between crucible and connector. No more wall, smooth straight through pull and a short reset.
    The only thing I desire is less pretavel (longtime 1911 man). All said and done 5 stars. Stop hesitating and buy the 3.3 pro connector by Ghost inc.

12. Great Upgrade for Glock trigger

    Posted by Troy Runyan on Jun 20th 2019

    I replaced the connector in my Gen 4 G26. The Ghost 3.3 took minimal modification, and made the trigger crisp, with zero over travel. Left just the slightest bit of wall, and has an amazingly clean break with a shorter reset. Highly recommended upgrade!

13. ghost.. the best!!!! connectors period!!

    Posted by jazz vechayiem on Jul 30th 2018

    just installed in my glock 20sf!!! its incrediablely light with a 6.5 pound striker spring, 6 pound trigger spring, ... runs flawlessly and this is my 4th connector from them . there warranty is amazing if you dont like the connector you can send it back for a diff one!! ghost inc... Evo elite and PRO 3.3 are the best!!! yes you will fell the lighter trigger from the evo 3.5 to the pro 3.3!!! patience is key dont over due it on taking out the tab if you mess up the trigger will still work !!!

14. replaced evo elite

    Posted by jazz vechayiem on Jul 20th 2018

    replaced in my glock 19 .. the difference is there! you will def feel the lighter pull although everything esle feels like the evo elite .. get this one!!!! replace the glock 20sf soon too and it also has the evo elite

15. Minor fitting with file is easy to do

    Posted by Josh on Jun 29th 2018

    You'll need to file the over-travel tab such that your cruciform can drop into the lower area of trigger block and move no further. To do this, you'll be taking your glock apart, removing the connector, filing it a little, think you have it just right, reassemble, test, try again. I recommend using the armorer's block with this, and be patient.
    
    Huge improvement in linear trigger pull. The resistance 'bump' is removed. 13/10 would recommend again.

16. lookout!

    Posted by Unknown on May 19th 2018

    finally a rifle trigger in a glock

17. Best addition to your Glock you can buy.

    Posted by Sgt P on May 4th 2018

    The look on my gunsmiths face said it all when I picked up my gun. He said he had never felt a Glock trigger so smooth and crisp. The 3.3 connector along with the 6lb trigger spring really sends your Glock to the next level. Forget all those over hyped drop in trigggers. Don’t waste your money. Ghost will take care you without a doubt with quality parts and excellent service.

18. Great Quality and Solid Results

    Posted by Rob on Mar 29th 2018

    I have four glocks and I run ghost connector's in all. My latest Gen 5 Glock 34MOS required allot more filing due to the new connector alignment in the Gen 5 varients. Trigger weight is exactly 3.3 lbs and no malfunctions. You will notice that initial unlocking for slide movement will be much more noticable but no effect on firearm cycle of operation.

19. Glock 19 gen 4 It Works!

    Posted by Barryc on Mar 29th 2018

    Take your time removing metal from the connector. I don’t have a trigger weight gauge but the reduction in effort is dramatic! I also used the 6lb trigger spring and the reduced rate plunger spring. I left the firing pin spring stock. Very cost effective package in my opinion.

20. Glock 40 MOS 10mm application

    Posted by rs on Jan 30th 2018

    This connector allowed me to use the 6.0lb striker/firing pin spring with my G40 10mm (which needs it) while still keeping the trigger pull weight down to an ideal range for me for its purpose as a wilderness predator defense gun.
    
    Oliver at Ghost gave me great information on upgrading from a Rocket to the Pro 3.3. Use the entire spring kit for the G40 10mm but be sure and use the extra power 6 lb striker spring or at least the original Glock 5.4 lb as a minimum. They provided me with spare springs as a bonus with the upgrade.
    
    Website instructions make it easy to do the fitting of the connector. Just be patient and take it down by about .01" at a time, maybe less when you are getting close.

Previous | Showing reviews 11-20 of 22 | Next