Rocket Trigger Installation Kit for Glocks GEN 1-5
RIK - ROCKET INSTALLATION KIT GEN 1-5*
(Except Glock 42/43/43X/48)
Requires Minor Fitting
* Everything in kit will work on Gen 5 for the exception of the trigger spring.
The TCT on the Rocket eliminates the over-travel that causes almost all right handed Glock shooters to drift their shots to the left, and left handed shooters to the right. This will change the accuracy of your Glock to levels you never knew were possible.
The Rocket will smooth out the press and the wall of resistance. This connector does not eliminate the stack it just smooth's it out. You will still feel the wall/glitch right before the firing pin releases. If you want no wall or glitch look at the EVO ELITE or PRO 3.3.
This connector is guaranteed to make you shoot better and faster!
All in one complete kit!
We combined all the parts necessary for a do it yourself installation of the ROCKET 3.5 LB and to give you best, lightest & safest trigger pull possible. You save a few bucks and get everything in one shot! The Kit includes 7 parts:
Please Note that all trigger kits and Installation kits now come with the COMPLETE SPRING KIT
1.) 1-Rocket 3.5 LB.
2.) 1- 6.0 lb Trigger Spring
3.) 1- 4.0 lb Firing Pin Spring
4.) 1- 6.0 lb Firing Pin Spring
5.) 1-Ghost Armorers Plate
6.) 1-Ghost Armorers Tool - two options
7.) 1- Reduced power firing pin safety spring.
Please Note: The 4.0 lb Firing Pin Spring may cause light primer strikes in some pistols. The 4.0 Firing Pin Spring is best used in Target/Sport shooting.
For Self Defense or in a 10mm/45 caliber Glock we recommend the 6.0 lb firing pin spring.
Showing reviews 1-10 of 13 | Next
First time I ever took my Glock apart!
Posted by RAY GRIGSBY on Apr 2nd 2021
Really amazing engineering here. I was apprehensive and considered taking my Glock 40 in to a gunsmith but decided to give it a try. I was able to follow the website instructions and I guess I was fortunate because after the second trim on the TCT I have a great trigger pull. Real improvement in my Glock trigger.
Ghost Rocket installation kit
Posted by Joe on Jun 30th 2020
Kit came complete with everything needed to upgrade my G22. The installation took about 30 minutes. I filed the connector trigger stop tab by hand and wanted to ensure the perfect fit.
The only thing I would suggest is to close the “s” shaped trigger spring ends a tad. A little too loose compared to the OEM spring.
Money well spent!
Posted by Fatelvis on Jan 23rd 2020
This kit made the trigger on my polymer 80 build much better. After the $.25 trigger job, I was still faced with a 6.75 lb trigger pull. Smoother, but still too heavy for accurate shooting, in my eyes. One by one, I replaced the parts, measuring the trigger pull with my Lyman digital trigger scale after each install. The firing pin safety spring was first. It reduced it by 1/4 pound. The 6 pound trigger spring lowered it another 3/4 pound. Finally, the connector, after fitting, lowered it another 1/2 pound, Leaving me with a 5.25 pound trigger. The connector definitely made the trigger feel crisper, and took out almost all of the over travel. The Gunsmith- thing back plate was handy when fitting the connector, but a stronger punch than the Glock tool was needed when probing the cruciform, to make the pistol fire for disassembly. The Glock tool was too flimsy, and kept bending. As I got closer to the final fitting, the effort got easier, needing less forced to press down on the cruciform. The 4 pound firing pin spring brought the trigger pole down to 4.25 pounds, but I don’t trust it for a reliable ignition, as this will be used for self-defense in the future. I will stick with the stock 5 pound spring.
Requires patience but worth it
Posted by Bob_VT on Jan 17th 2020
Adjusting the trigger connector a tiny bit at a time is time consuming but absolutely worth it. So worth it - when my wife compared the trigger on my glock to her stock trigger - she demanded I upgrade her's too.
Not for Gen 5
Posted by Unknown on Dec 23rd 2019
Probably works great, but i do not think it works with Gen 5 17's or 34's. The spring is different and i think the connector locked up my gun, had to remove the firing pin and go back to the stock connector. Maybe it was my error, who knows.
Posted by Unknown on Aug 15th 2019
This kit is easy to install and performs as indicated.
Posted by Marcus on Aug 8th 2019
Where do I start? The smooth trigger pull, which is so smooth as silK. Maybe I should start with the over-traveling, which doesn’t exist. Or that the reset is now almost instant. It’s so quick now.
After a bit of time getting it fit, I am happy to say that I now have an extremely smooth, crisp trigger. It’s beautiful. I will be recommending this to everyone I know.
7 Years and Counting.....
Posted by MRC on Apr 12th 2019
I found this product by chance doing the infamous, "best GLOCK trigger" search online.
There was no real information about it back then except for a couple of YouTube videos that were not as descriptive as the ones today. PRO TIP to future reviewers "always" include a portion highlighting the reset on Ghost Connectors please!
I have had zero issues with this model and it runs well with a smooth break and almost instant reset. This works for me and each individual is different so I suggest doing your research and interact with the staff at Ghost as time and time again their team, specifically Oliver, has enlightened me on several levels. My interaction with Ghost prompted me to become a GLOCK armorer which I have to renew again soon. I like to know my gear in and out and Ghost was the catalyst to ensure that I do.
Have patience when fitting your TCT it's a custom fit and when you dial it in you won't regret it. Follow the installation guide as that's the key to success. I personally used the "Spaulding Cut" on mine and have not looked back.
Just wish I had that new fancy clear plate they use now as I have the orange one. Though I did place on order for one and will be up to date!
Last piece is to train with this new connector as you'll be amazed at how responsive and fast the Rocket is!
You will NOT be disappointed.
Get this kit
Posted by Joe on Apr 9th 2018
If this is your first kit that involves filing down the TCT get this kit. Had three trigger kits to install and this made installation with ease. The back plate allowed to get the perfect fit without having to tear the whole gun down to keep checking trigger function. If you have the take down punch at least get the back plate. As for after installation night and day.
Once you buy it your hooked
Posted by Joe on Apr 3rd 2018
Had one of these installed into a g27. Was hitting better groups and further targets immediately. Bought a G23 took it to the range, after my first trigger pull I was like nope all my glocks will have the rocket installed.
Showing reviews 1-10 of 13 | Next