WILSON COMBAT GRIP MODULE P365 XMACRO- NO MANUAL SAFETY - SHT GRY

Wilson Combat, Grip Module, Short, P365 Light Rail, Fits Sig Sauer P365 X-Macro, Gray

WC35MS-SG

 Revolutionize your shooting experience and upgrade the concealed carry potential of a SIG-SAUER P365 XMacro with the Wilson Combat P365 XMacro grip module. Their molded polymer grips will not only improve your grasp on the gun but also control recoil better than before. With its redesigned shape, texture, and ergonomics, these models are designed to give you that custom handcrafted feel in no time at all. Their fresh look at the P365 XMacro grip module incorporates the suggestions of tactical trainers, champion shooters, and firearms experts into the final product that has a look that is unmistakably Wilson. Wilson believe it is the most practical, comfortable, and stylish P365 XMacro grip available and the ideal choice for concealed carry and defensive handgun use.

DISCLAIMER: "SIG" is a federally registered trademark of SIG SAUER Inc. and is one of many trademarks owned by SIG SAUER Inc.

Neither Wilson Combat nor this website is affiliated in any manner with or otherwise endorsed by SIG SAUER Inc.  The use of "SIG" or "SIG SAUER'' on this page is merely to advertise the sale of SIG pistols, parts, or components.  For genuine SIG SAUER Inc. products and parts, visit www.sigsauer.com.

P365 Grip Removal/Replacement:

• Unload and clear your pistol.
• Remove the slide assembly and set it aside.  Keep your takedown lever in the down position.
• Remove the rear frame pin from left to right with a small punch.
• Lift the chassis straight up from the rear at a forward angle out of the stock frame.
• Install supplied magazine catch, spring, and lock into the WCP365 Grip Module
• Reverse the process to install the chassis in to the new grip frame.
• After installation, ensure that the takedown lever is under spring tension and the slide safety lever isn’t blocking the slide, reinstall the slide assembly and move the takedown lever into the locked position.  Ensure that the slide lock and takedown lever have spring tension.
• Ensure that your pistol functions properly and your magazine drops cleanly after installation of the new grip frame prior to use.