EVO ELITE COMPLETE Trigger Kit for Glocks GEN 1-5
EVO ELITE COMPLETE TRIGGER KIT FOR GEN'S 1-5 GLOCKS
Fits ALL Glock Models (Except Glock 42 & 43)
The EVO has the lightest feeling trigger press due to the smoothness and stage free 3.5lb design. (The PRO 3.3 is 2 ounces lighter)
- Smoother Than any other Trigger
- Shorter Pull Eliminates Over Travel
- Perfect Function
- Fits GEN 1-5
- Complete Spring Kit Included- You will not use the trigger spring on the GLOCK Gen 5 models
- Ghost Lifetime Guarantee
- Minor Fitting Required
The GHOST EVO is the best sage free self-defense & Target trigger control connector Ghost makes!
The EVO is Smoother, Lighter, Shorter and eliminates trigger Over-travel! These attributes give you the fastest most accurate first shot hit advantage of any self-defense Glock style trigger.
HIT FIRST & FAST WITH THE EVO 3.5
The EVO 3.5 fixes the Glock bump or glitch, this is the pre-travel resistance you feel and must overcome when the trigger bar bumps into the connector. This bump causes you to apply excessive force and will move the pistol off target. Another thing the PRO 3.3 corrects is trigger over-travel; the excessive movement of the trigger after the pistol fires. Over-travel causes the pistol to move off of alignment with the target, making your shot go low and to one side.
EVO 3.5 KEEPS YOU ON TARGET
The EVO 3.5 is the best self-defense connector made and by changing a few springs you can also have the best sport or enhanced self-defense trigger connector! We believe that this trigger control connector makes all others obsolete. Once you try it, we know you will agree! Minor fitting required.
Ghost Complete Trigger Spring Kit
This is a complete drop in trigger kit is designed to help you fine tune and improve your trigger pull, and function in competition pistols, and for Self defense Carry or Hunting pistols.
Included in the kit are 4 Drop in Springs:
- 4lb Reduced Power Striker Spring- to only be used for a strictly target or competition set up.
- 6lb Extra Power Striker Spring- use this to increase the strike power and makes for a faster reset.
- Reduced Power Safety Block Plunger Spring- smooth out the bump as the safety plunger is engaged.
- 6lb Extra Power Trigger Spring (Extra power reduces the pull weight)- The heavier weight offsets the added weight of the striker. This is an assisting spring and lightens up the trigger press. This spring is not used on GEN 5 Glock's
The Ghost Complete Drop in Spring Kit gives your Glock a smooth, crisp, lightened Trigger pull that helps promote consistent, match-grade accuracy. You can change specific springs to improve a particular aspect of the trigger pull, or do a complete upgrade.
Accurately calibrated spring weights deliver consistent force through the entire compression and release cycle to give you a light, refined trigger pull without sacrificing the reliability of your pistols Safe Action system. Trigger Spring has nearly 30% more power than factory spring, which actually reduces pull by as much as 1 lb. for improved control. This produces faster trigger reset for quicker follow up shots. Reduced power Safety Spring reduces friction caused by the firing pin safety, further smoothing the pull. Striker Spring is designed for improved consistency and durability over factory spring.
You can choose the Competition Lighter Striker Spring or the Heavier Self Defense Striker spring.
This Connector is For Competition and or CCW Self-Defense.
Recommended: A gunsmith or armorer should install this connector.
NOTE : THIS IS NOT A DROP IN TRIGGER CONNECTOR MINOR FITTING IS REQUIRED
Please Note: The 4.0 lb Firing Pin Spring may cause light primer strikes in some pistols and this is the Target/Sport configuration. For Self Defense or in a 10mm/45 caliber GLOCK we recommend the 6.0 lb firing pin spring or keep stock firing pin spring and use the 6lb. trigger spring and the reduced power safety plunger spring.
Posted by JC on Aug 22nd 2017
My perfect not-a-glock:
Ghost Evo Elite connector
Ghost 6lb striker spring (or stock 5lb) and spring kit
Zev Fulcrum Trigger
Polymer80 PF940C Frame
The trigger pull is smooth, the break is clean, no over-travel, and short reset. Coupled with a high quality trigger face, the 1911 grip angle of the pf940c, and you've got one awesome not-a-glock.
The ghost clear plate for the rear of the slide really makes the trial and error of fitting this connector easy.
EVO ELITE COMPLETE Trigger Kit for Glocks GEN 1-4
Posted by Kim Schioldan on Aug 7th 2017
This is a very thought through part, when you get the concept of the filing and get it right it will be the best Glock trigger you have ever had, I highly recommend this.
Best $$ I've Spent on Glock Upgrade
Posted by Jim H on May 25th 2017
The Evo and spring kit went in exactly as advertised, following the excellent instructions on this web site. Mine is mated to an Overwatch Precision DAT trigger, trigger bar and cruciform - which, unlike some aftermarket "flat trigger kits," does not bypass or disable any of the three safeties. I used the 6# trigger and striker springs and the reduced power safety plunger spring (the recommended self defense combination). The result is the smoothest, most consistent 5# Glock trigger I've ever felt. You see some of the benefit of that on the pull gauge itself - the readings are within an ounce or two, pull after pull, because without the bump-creep-wall-crunch of the stock trigger, the pressure can be even from full travel to break. It truly does eliminate the bump - the trigger feels similar to tuned trigger on a Tangfolio Stock competition gun - no grit, no bumps, no pressure changes in the short travel. Overtravel is imperceptible. I took the TCT down a couple or three thousandths beyond the first trial where it would fire (allow enough cruciform travel to release the striker) every time - and then it really smoothed out. There is a point where it will fire every time, but the left arm of the cruciform is still contacting the ramp in the drop-safety slot. I went a little further until it drops flat onto the lower notch of the slot and then the magic and repeatability became obvious. It drops off the striker tab and resets reliably and safely - you can easily verify that you have plenty of engagement between the sear face on the back of the cruciform and the striker tab using the provided clear armorer plate. No, it does not make the pistol full auto, and no, it does not malfunction - if you do your part and install and fit it correctly. My G19 just got a lot more "perfect." Ordering another one for my G34 now.