GHOST ROCKET 3.5 FOR GLOCK GEN 1-5

Showing reviews 1-10 of 14 | Next

1. Great for 80% Builds

   Posted by Unknown on Jun 20th 2024

   Installed into my 80% Arms build because I wasn't happy with the trigger due to the assortment of parts I used. Results in a longer yet lighter trigger pull than the factory connector, which is what I was looking for.
   
   Installation took some time, primarily due to the frame; at first the striker was refusing to drop, and it turns out I had to relieve the area behind the trigger bar to allow for further trigger travel. After this and further fitting of the overtravel stop (TCT), I'm pretty happy with how it turned out.
   
   Huge thanks to Oliver for being so responsive and guiding me through that troubleshooting process over the phone. They'll also replace the connector if you mess it up by sanding too much, which I almost did. Customer service is top notch, would highly recommend.

2. Well worth it

   Posted by Michael on May 4th 2022

   I do not make a lot of modifications to my Glocks. Just a couple extended controls, new sights, and now the connector. The Rocket both improved the pull of the trigger and shortened the reset.
   
   The install instructions made perfect sense once I had the product in hand. The fitting process was simple and straightforward. Just took some time. Definitely recommend the armorer back plate. I already had a set of punches that could have been used, but I bought the tool as well.
   
   The shipping was fast, and Ghost customer service was terrific. All around great experience.

3. What a difference

   Posted by Shooting Sports Innovations on Feb 14th 2022

   Not just having a nice over travel stop that stops the bar at the source.. it has a nice ramp that really cleans up the stroke.

4. Great upgrade for little $$

   Posted by Jeff D on Oct 18th 2021

   This is the 3rd or 4th Rocket I've installed in as many Glocks. I love the way it breaks like glass, and the reset is so very quick/short. For the price of the Rocket, you really can't go wrong. I will have one on every Glock I ever own.

5. First upgrade on any glock

   Posted by Emilio Santana Jr. on Feb 23rd 2021

   This upgrade is a must on any glock. One of the first things I do...Install a ghost connector. Definite wall and lighter pull

6. Very nice.

   Posted by Jon on Jan 18th 2021

   I tried the 3.5, the 3.5 ultimate, and finally the 3.5 rocket. And the Rocket is the winner. I have a overwatch tac trigger (full assy) and I was not able to get rid of all the take up due to the over watch trigger bar, but I was able to cut it in half. The reset however is fantastic. The best way I can describe the 3.5 rocket with the overwatch is like a 1911 with a bit more over travel. There is a wall but a very small one. Fitting the tct did take some time but is easily achievable.

7. Worth The Effort!

   Posted by Carey J on Nov 5th 2020

   Yes, it takes some fitting, and you DO want to have an armorer's 1/2 end plate before you start. But the results are AWESOME. I paired this up with a Precision Overwatch OG DAT trigger, tweaked the spring tension on the connector, and I ended up with a trigger pull of just over 3 lbs, with NO overtravel, a quick, crisp reset, and nice "wall" to let you know when you've reached the "break" point. Easily the best trigger I've ever seen on a Glock-action pistol

8. Trigger over-travel

   Posted by Bob Aldridge on Aug 22nd 2019

   The Rocket is just like other minus (-) connectors, except it has the tab that eliminates trigger over-travel.
   
   The tab must be custom fitted, as it is too long from Ghost--by design. The trick is to shorten the tab just enough to eliminate the over-travel.
   
   Cut some off; install and test; take it back out and cut some more off. Repeat until the trigger breaks cleanly but without the over-travel.
   
   If you are a ham-fisted shade-tree mechanic, it is best to let a meticulous, experienced armorer do it.
   
   There is also the "Dave Spaulding" angle cut on the tab that reduces reset a little.
   
   Great product, but it is NOT a drop-in part.

9. Great connector

   Posted by Johnathan Benson on Oct 6th 2018

   This connector was annoying to fit but once it was fit it was amazing. I have the ghost 4.5 pound striker spring,6pound trigger spring, and a reduced safety plunger spring. The combination is amazing. It helped tremendously with over travel. You do need the armorers back plate for the install/fitting of the connector.

10. Worth IT

    Posted by Nathan on Feb 9th 2018

    Did the job, took a lil bit to fit the part but once done made it easier to shoot.

Showing reviews 1-10 of 14 | Next