PRO 3.3 COMPLETE TRIGGER KIT Gen 1-5
PROTK - PRO 3.3 COMPLETE KIT Gen 1-5
PRO 3.3LB Trigger Connector and Spring Kit for Glock GEN 1-5
Fits ALL Glock Models (Except Glock 42 & 43)
This is the connector long sought after by Glock Enthusiast everywhere. This is the Lightest Smoothest Connector on the market today 3.3 lb. angled connector.
Lightest Stage Free Trigger
- Smoother Than any other Trigger
- Shorter Pull Eliminates Over Travel
- Perfect Function
- Fits GEN 1-5
- Complete Spring Kit Included- Trigger spring is not used on Gen5 Pistols
- Ghost Lifetime Guarantee
- Minor Fitting Required
The GHOST PRO 3.3 is the best self-defense & Target trigger control connector Ghost makes!
The PRO 3.3 is Smoother, Lighter, Shorter and eliminates trigger Over-travel! These attributes give you the fastest most accurate first shot hit advantage of any self-defense Glock style trigger.
HIT FIRST & FAST WITH THE PRO 3.3
The PRO 3.3 fixes the Glock bump or glitch, this is the pre-travel resistance you feel and must overcome when the trigger bar bumps into the connector. This bump causes you to apply excessive force and will move the pistol off target. Another thing the PRO 3.3 corrects is trigger over-travel; the excessive movement of the trigger after the pistol fires. Over-travel causes the pistol to move off of alignment with the target, making your shot go low and to one side.
PRO 3.3 KEEPS YOU ON TARGET
The PRO 3.3 is the best self-defense connector made and by changing a few springs you can also have the best sport trigger connector! We believe that this trigger control connector makes all others obsolete. Once you try it, we know you will agree! Minor fitting required.
Ghost Complete Trigger Spring Kit
This is a complete drop in trigger kit is designed to help you fine tune and improve your trigger pull, and function in competition pistols, and for Self defense Carry or Hunting pistols.
Included in the kit are 4 Drop in Springs:
- 4lb Reduced Power Striker Spring- Should only be used for a strictly target or competition set up.
- 6lb Extra Power Striker Spring- Use this to increase the strike power and makes for a faster reset.
- Reduced Power Safety Block Plunger Spring- Smooth out the bump as the safety plunger is engaged.
- 6lb Extra Power Trigger Spring (Extra power reduces the pull weight)- This heavier weight offsets the added weight of the striker. This is an assisting spring and lightens up the trigger press. This spring is not used on GEN 5 pistols
The Ghost Complete Drop in Spring Kit gives your Glock a smooth, crisp, lightened Trigger pull that helps promote consistent, match-grade accuracy. You can change specific springs to improve a particular aspect of the trigger pull, or do a complete upgrade.
Accurately calibrated spring weights deliver consistent force through the entire compression and release cycle to give you a light, refined trigger pull without sacrificing the reliability of your pistols Safe Action system. Trigger Spring has nearly 30% more power than factory spring, which actually reduces pull by as much as 1 lb. for improved control. This produces faster trigger reset for quicker follow up shots. Reduced power Safety Spring reduces friction caused by the firing pin safety, further smoothing the pull. Striker Spring is designed for improved consistency and durability over factory spring.
You can choose the Competition Lighter Striker Spring or the Heavier Self Defense Striker spring.
This Connector is For Competition and or CCW Self-Defense.
Recommended: A gunsmith or armorer should install this connector.
NOTE : THIS IS NOT A DROP IN TRIGGER CONNECTOR MINOR FITTING IS REQUIRED
Please Note: The 4.0 lb Firing Pin Spring may cause light primer strikes in some pistols and this is the Target/Sport configuration. For Self Defense or in a 10mm/45 caliber GLOCK we recommend the 6.0 lb firing pin spring or keep stock firing pin spring and use the 6lb. trigger spring and the reduced power safety plunger spring.
Spot on product
Posted by Steve on Feb 25th 2019
Are the results just as described by Ghost once you get it squared away? Yup. Eliminated almost all of the overtravel (I left a little by design to allow the striker to re-engage during reset), but my trigger pull is down to 3.5lbs in the middle of the trigger, there is virtually no overtravel, and I couldn't be happier with this product. I fully recommend it, and have had zero change to reliability. If I could give it 6 stars, I would.
Best Trigger Kit on the Market.
Posted by Cody Rourke on Feb 15th 2018
As a NRA and USCCA Instructor, I have seen and shot all the "gimmicks" over the years. I have personally been using Ghost connectors and spring kits in my all Glocks over the years and this is by far, the best complete trigger kit on the market! I could not be more impressed. I refuse to use any other kit in my personal and customer guns. This kit simply makes your Glock go from a zero to a hero in minutes! Also, be sure to check out the MOAB for your Mags... another kick a** product by Ghost!
Posted by Unknown on Feb 11th 2018
I will be honest this took me some time to put in. However I took my glock trigger from 5.14 pounds to 3.9. I'm very happy with this product! Just make sure you have a good idea how to take a glock apart first.
Just do it
Posted by Lawless on Jan 10th 2018
So linear, so smooth. Like a different gun. Once fitted, overtravel is gone forever and no more wall to affect keeping the sights on target during the trigger press. 100% recommended.
Ghost sent me some swag too!
Ghost 3.3 Pro connector kit
Posted by John Zatko on Dec 24th 2017
Hands down the best connector I’ve ever used in a Glock. Smoothed out the trigger pull completely to where now there is not “bump” or “wall” anymore. There is a slight hesitation when you approach the once predictable wall but otherwise it’s smooth the whole way until the gun goes off. Amazing product just be sure to take only like a 1/16” off at a time until your gun will fire. Otherwise you’ll ruin the connector
Posted by Chris on Dec 8th 2017
If you are patient and make very small adjustments you will have the smoothest trigger ever
Frustrating to install, but totally worth it!
Posted by email@example.com on Oct 21st 2017
I have had Ghost triggers before, and knew what to expect with installation. I was installing on a Gen 4 G19. It was a tedious process because I was taking it slow to make sure I didn’t shave too much off, so it took almost an hour to install. Still, once it was installed, it was totally worth it. No trigger creep, the takeup is gone, and there is absolutely zero overtravel. I am very happy with it.
Posted by Richard on Aug 30th 2017
Had the trigger connector installed by a professional gunsmith with 3.5 lb trigger pull. This has made a major and positive improvement to my accuracy.
Posted by William Wolfe on Aug 28th 2017
Took a bit of patience to install this, I'm no gunsmith but there are good video's on youtube to help! If your not mechanically inclined by all means take it to a gunsmith! Trigger is awesome, very sweet worth the money!
Pro 3.3 complete trigger kit
Posted by Glenn Test on Aug 20th 2017
This is the 6th Ghost trigger kit I have installed on Glocks, with the last 5 being Pro 3.3's. My last three were on a model 20, model 27 and model 35.
If you are conscientious and patient you can get a silky smooth trigger pull that is shorter, lighter and with an incredibly quick reset for follow up shots. Stock my model 20 and model 27 had a 7lb trigger pull. The model 35 was 5lbs 10ozs. With the light firing pin replacement spring my trigger pull in all three models is consistently 2lbs 10oz. With the stock Glock firing pin spring, trigger pull is 3lbs 6ozs and with the extra power firing pin spring trigger pull is 4lbs even. The above is with buffing all bearing surfaces. The complete kit is top quality and well worth the effort!