Site Information

 Loading... Please wait...
  • ANGEL 3.0 Gen 1-5 & X (GHO_ANGEL_3.0)

ANGEL 3.0 Gen 1-5 & X


Product Description


Smoothest and lightest Self-Defense Drop-in trigger connector ever!

This is the world's only connector with Anti Flinch Engineering = smooth no load trigger pull.

You will be able to shoot your pistol more accurately and faster because there is no load before the shot breaks.

The same smooth feel all the way through! 

We accomplished this by redesigning how the trigger connector works the pistol. The redesign gives the trigger a huge 

mechanical advantage over the old style conventional connectors.


You will have the best trigger pull possible for self-defense!

Self-defense situations are dynamic, you must react to the actions of others. Get a flash sight picture and pull the trigger very rapidly!!

The trigger is the heart of a self-defense pistol, good trigger good results!

Smooth no load means NO FLINCH and STAYING ON TARGET!


Product Reviews

Write Review

Showing reviews 1-10 of 21 | Next

  1. So good I bought TWO!!! 5 Star Review

    Posted by on Mar 4th 2022

    After a great advise from Oliver, I installed this connector to my G17 Gen4 and 19X. Following the install video at Ghost site I was able to easily install and adjust them. The performance ever since is very noticeable, trigger pull is soft and consistent, light and crisp break.

  2. The Angel Flies 5 Star Review

    Posted by on Dec 1st 2020

    I received the Angel 3.0 promptly after ordering it. I installed it and had an issue with the trigger bar rubbing the frame. That night I messaged Ghost with my issue and disappointment. To my surprise 3 minutes after they opened the doors the following morning I received a call. This is the 2nd connector I had installed in this firearm and I did not have a fitment issue with the first. He told me to forget everything I know and asked: did you watch the video on connector adjustment? The what? No sir, send me the link. I knew it needed to be bent. The video revealed S.O.P adjustment. Easy breezy. This is not for "Wile E. Coyote" gun experts but the novice like me who is always learning. After adjusting back and forth a couple times I found the sweet spot. I was expecting a lighter pull. I wasn't expecting a slightly shorter take up. I love Glock, I don't like the trigger. I now have a trigger with a defined wall, less pre-travel, crisp break and short reset. My trigger gauge arrived Sunday and I am consistently pulling between 3 1/2 and 3 3/4. Concerning me personally, I have ended up with the perfect combination of pull weight and safety. I have the Angel 3.0 in combination with 4.5 striker spring and OEM trigger spring. I have put the 6# trigger spring and for me the factory trigger spring functions better. Thank you Oliver and Ghost Inc. Great product and great service.

  3. he'll yea borther 5 Star Review

    Posted by on Jul 3rd 2020

    yeet.. if you have a gen4 glock swap the trigger bar with a gen3 trigger bar to get the real experience you're looking for.. ps: i used a p80 flat trigger with this connector and reduced the pull by 20%.. (removed all that empty space before the click, now it just goes *click* *click* *click*) super crisp reset its unlike any glock trigger.. also have one on my 19x which is a gen5 and its very similar but still has a little over travel compared to the gen3 p80 trigger.. tbh after the first pull it doesn't matter but that first pull might be all that matters in a real close encounter self defense situation.

  4. Fix glock standard trigger 5 Star Review

    Posted by on Jun 15th 2020

    I put the angel 3.0 connector and springs in my glock 22. My trigger pulled an average of 6lbs 14oz before the small modification.. Now the trigger pulls a cleaner softer 3lbs 12oz ... I can handle that.. it has alittle grit still but that's just glock needing alittle polish of some time to break in.. I say go for it. Nice inexpensive fuc to help with that standard glock trigger BS.

  5. Love how it feels in my G20 Gen 1 5 Star Review

    Posted by on Jun 11th 2020

    I have tried few different connectors but the Angel 3.0 with spring kit has made this gun so easier to shoot, love it, i also bought for my G19 Gen 5 but neither of the 2 Angel 3.0 will not work in it and not sure how to male it work, when try to fire the firing pin doesnt go off so have to push in on slide release then firing pin goes off then can break back down

  6. HOURS OF WORK SAVED 5 Star Review

    Posted by on Feb 21st 2020

    The Ghost Angel is a drop in solution avoiding the need to fit and polish many different parts to get the same trigger performance. It is the very best connector on the market.

  7. Best trigger pull ever 5 Star Review

    Posted by on Jun 16th 2019

    What an improvement to the trigger feel. I would have never thought this was possible. My Glock 19 is so much more fun to shoot now.

  8. Smooth trigger with no wall 4 Star Review

    Posted by on Mar 11th 2019

    I installed this in a Gen3 and a Gen4. Worked beautifully in both and gave a great trigger feel. Installed it in a G45 and it would not release the striker. Called Ghost and was told due to manufacturing tolerances at Glock, it would work in some G45's and wouldn't in others. I was told to send it back and try an Edge in the G45.

  9. Great Buy 5 Star Review

    Posted by on Feb 19th 2019

    Bought this for my G19 Gen 5 and had a small issue with geometry so I put it in my G21. I have one word for it WOW. I can not believe the difference. Accuracy improved dramatically with the G21.

  10. smooth-est Glock Trigger I have ever used 5 Star Review

    Posted by on Jan 19th 2019

    I would like to start by saying THANK YOU to "Authur" and all the folks down at Ghost, and Master Gunsmith-Mr. Don Sonnier (49 years smithing and counting).

    The Angel 3.0 connector was just a part of a complete upgrade; (Gen. 3 Glock 21-.45 acp).
    1) Meprolight R4E Suppresor height sights
    2) Threaded Match grade barrel
    3) Tungsten guide rod with new 17# spring
    4) extended slide release
    5) extended mag release
    6) 6.5# striker spring
    7) 6# trigger spring
    8) reduced power safety plunger spring
    9) turbo Maritime cups
    10) Angel 3.0 Connector

    we had to make 1 minor adjustment
    (a glock-ism) not a Ghost Inc. problem
    after installing the Angel Connector the geometry of the Glock Trigger Bar needed to be adjusted
    to allow the bar to drop allowing the striker to fire.
    {Master GunSmith-Mr. Sonnier made the adjustment in about 2 min.s}
    This adjustment was needed on the weapon, even without the upgrades. The Factory Trigger Connector and pull weight masked the problem.

    measured pull weight was 3# +/- 0.2#s over 25 measured trigger pulls...

    5 Stars
    this is the smooth-est Trigger I have ever felt on a Glock
    Trigger Creep-minimal
    Trigger break-super crisp
    Trigger re-set best I have experienced on a Glock

    Again, Thank to the folks at Ghost Inc.
    and a special thanks to Master GunSmith, Mr. Sonnier.

Showing reviews 1-10 of 21 | Next

Click the button below to add the ANGEL 3.0 Gen 1-5 & X to your wish list.