GHOST UNIT PERFORMANCE 3.0 FOR GLOCK GEN 1-5*
GHOST UNIT PERFORMANCE 3.0 TRIGGER CONNECTOR FOR GLOCKs Gen 1-5*
*Does not fit Glocks 42/43/43X/48
This is the smoothest and lightest Drop-In Glock trigger connector made. The UNIT 3.0 includes an over-travel tab that shortens overall trigger movement. This Glock connector, in combination with its patented design for smoothness, provides for more accurate shooting and faster follow-up shots.
The name for the GHOST UNIT 3.0 Drop-In comes from the first U.S. Military organization to adopt a Ghost Trigger. The UNIT (aka: U.S. Army DELTA Force) is the pinnacle of all military organizations.
We wanted to honor these warriors and thank them for using our products.
The GHOST UNIT 3.0 is a Drop-In connector for all Glocks® Gen 1-5 except 42/43/43X/48 and INCLUDING the New GLOCK® PERFORMANCE TRIGGER WITH BAR and all pistols that use the Glock pattern.
- Millions sold because-ONLY HITS COUNT!!
- Be a GHOSTMAKER not a ghost!
- A portion of all sales will go to SOC-F
- Patented 9,062,925
Works great, however…
Posted by firstname.lastname@example.org on Sep 20th 2023
I installed the Glock Performance Trigger into my G19 G5 and wasn’t happy with it. So purchased this UNIT 3.0 and yes it does what it says, reduced trigger pull from 4.2 to 3.2 lbs.
However the GPT was very poor in my G19. Very gritty and did not improve feel nor trigger weight over my previous trigger.
Posted by Stockton Brett on Sep 19th 2023
I have used many different connectors. This one is the best drop in connector period.
Best solution for overtravel + smooth feel
Posted by Symon on Aug 25th 2023
So! now that I have tried the evo elite and evo unit in just about every trigger setup I can safely develop. I personally can say this is my favorite aftermarket connector. I've even tried this in just gen3'4'5 & Glock performance trigger. Ghost unit + g.p.t. is 100% to date, the closest we can get to 1911 IMO. I personally don't have a problem carrying something so light but factory safety is a thing so I'm not worried about it. Even though I could carry with such I light trigger I won't. Why because it will throw off my consistency with my other Glocks. If ghost could tune this to keep the over travel, pull stroke feel, but consistent 4-5lb pull (on a scale) this would replace everything for me. Otherwise still a fantastic connector. Is it worth a try with the g.p.t.? Yes if you want full ultralight race gun with the lightest "wall" you ever met. It's consistent, it's trainable, it will become predictable. It feels like stepping off a 90 degree cliff with <1% speed hump at the end. Gaston's breaking glass feel is mostly gone. If you are using this with a standard gen5 Glock trigger the speed hump "Rolling break" grows to 60-70% and still feels beautiful. It all comes down to how much you would like to experiment and what you desire. It is definitely the best time to be alive in the pew world.
Definitely the best I’ve used!
Posted by Jeff on May 23rd 2023
I rely on Ghost connectors for all my builds and have used several of the trim to fit options and this drop in connector does everything the trim to fit does without the hassle! Definitely my new go to!
Ghost Unit Connector.
Posted by AKTommy on May 15th 2023
This Ghost connector is one of the best I've installed. I had three things on my list concerning this particular trigger, shorten overall travel, lighten sear release point, and shorten reset travel. This connector does all three in a simple 10 minute install. The connector tuned in very easily. Eliminating excessive trigger bar drag.
So far the best connector I have tried.
Posted by Justin on May 8th 2023
So I have tried all the ghost connectors aside from the ones that require hand fitting. There are a couple that are technically the same, but have the extra holes that are supposedly self cleaning. I recently got an angel 3.0 but I couldn’t resist when I got my performance trigger to get the unit 3.0 performance. The Angel 3.0 is really good but I think the unit 3.0 performance does in fact lead the pack. It does seem to reduce over travel as it claims. For some reason it wouldn’t work with my Apex GEN 5 trigger assembly. I think the Apex trigger doesn’t move far enough rearward or something like that and it doesn’t have anything to do with bending the connector in or out. There is a slight difference to the back of the trigger bar on an OEM GEN 5 bar compared to the Apex. It is $40 which seems like a lot but I’m about to order another one. Most people are buying parts like this for a long-term carry set up, which I think is justifiable, considering how much better the trigger can be.
Simple and Perfect
Posted by Joseph J Castelli on Mar 22nd 2023
If you have ever tried one of the Ghost connectors that you had to fit, spend the 1-2 hours trimming, working, trimming, to trim too much and return it for a replacement (Ghost Inc is good that way), to do it all again. Well, your trials and tribulations are over, this Ghost Unit 3.0 is a drop-in, no fitting is needed. I ordered 2 of these to try in two different Glocks, the improvement over the standard Ghost connector is immense. I would recommend this be your go-to connector for your Glocks.
Wow, just wow!
Posted by Unknown on Mar 13th 2023
I have had several other trigger bars from Ghost and other companies over the years and they’re all put to shame with this. This is easily on par with a $150 complete trigger set up I have in another rig. This is the first time I’ve been stoked about such a simple part. Just buy it.