PLUS 6 MOAB FOR GLOCKS -FULL SIZE MAGS - BLACK Glock Baseplates Glock Parts

Other Details

Sort Order:

[{"GLOCK MAGAZINES AND MAG ACCESSORIES":2,"MISC GLOCK ACCESSORIES":0,"MOAB® - Mother Of All BasePlates":2,"GHOST MANUFACTURED PARTS":76}]

Find Similar Products by Tag

Find Similar Products by Category

GHOST INC.

PLUS 6 MOAB FOR GLOCKS -FULL SIZE MAGS - BLACK

$19.95

28 product reviews

SKU:

GHO_GL_PLUS6_BLK

Quantity:

Product Description

PLUS 6 MOAB (Mother Of All Baseplates)

FOR GLOCKS GEN 1-5 IN BLACK

DOES NOT WORK ON 10rd GLOCK MAGS

MORE BULLETS MORE LIFE

Features:

Adds 6 Rounds to 9mm and 5 rounds to .40acp & .357 Glock's Magazines!
Works on 19X, 17, 17L, 22, 24, 31, 34, 35, 37 & 45 magazines
Stainless steel extra power magazine spring included
Rounded ergo design
Positive mag seating
Extraction Traction Points
Debris extraction ports
Superior tough construction
No more painful corner spikes in your palm
Ghost unconditional lifetime warranty!

These are too long for "Limited Class" magazines, limited class maximum length is 140.25mm. They will work for “Open Class” with a maximum length of 170.25mm.

It adds 1.655” to the length and overall mag length is 149.45mm.

Installation Instructions:

The Ghost MOAB magazine extension for Glock factory 17 9mm/15 .40 S&W round magazines consists of 4 items 3 of which make up the magazine extension assembly;

The Sleeve-the rectangular piece that you may look through-Assembly
The MOAB Spring-the coil stainless steel spring that powers the extension-Assembly
The MOAB Base-the MOAB that inserts into the sleeve-Assembly
The Disassembly Tool-if ever needed to disassemble the assembly.

Prior to installation of Ghost MOAB magazine extension, you must remove the (1) existing magazine baseplate (2) magazine baseplate insert, (3) the magazine spring and (4) remove the follower from the spring, you will reuse only (4) the follower. Place the unused parts in suitable storage container and label them for possible future use-Caution the contents are under the pressure of the magazine spring, eye protection must be worn when manipulating springs.

Note: Once removed you may want to consider cleaning the magazine body.

Slide the Sleeve part number one (1) with the shortest side oriented along the rear of the magazine until it can go no further.
Attach the spring into the follower you removed from the host magazine. You will notice that the spring is not symmetrical there is a large end (bottom) and a small end (top). This small end snaps into the follower (if it does not completely snap in you may still install the follower partially on the spring after a loading it will seat onto the spring). Now with the follower attached to the spring insert them all into the magazine until you see the follower is at the limit of it’s travel in the magazine. There will be many coils extending below the sleeve.
Grip the magazine body firmly so that you can push down on the installed MOAB Sleeve (1) towards the bottom of the magazine. This downward pressure will aid in locking the MOAB Base (3) into the sleeve when you join them.
With the MOAB Base (3) use it to capture the large end or bottom of the spring.
Push the MOAB Base (3) with the MOAB spring (2) into the MOAB Sleeve (1) until it locks, it should make snapping sound-you’re done!
To remove reverse the process. To remove the base, you will need the tool and a pair of pliers or channel locks to compress the disassembly tool enough to unlock the base. We designed these to stay on!!

Product Reviews

Write Review

Previous | Showing reviews 11-20 of 28 | Next

Excellent!

Posted by Robert Clarke on Sep 8th 2020

Great expansion base plate and extension combo! Easy to install.
Mother of all basplates

Posted by Joshua Rhodes on Sep 1st 2020

It's not a lie this thing is sweet like all new glock mags the last round is always a little tight
Works flawlessly

Posted by Joshua Rhodes on Aug 13th 2020

I love the moab it only works on stock OEM glock mags need to also design it for magpul mags gives alot of extra real estate for reloads held all 6 rounds like any glock mag last ones are always hard to get in by hand get a speed loader
Quick and easy install - no malfunctions

Posted by Jason on Jul 31st 2020

These went on super quick, minutes.

If i could change one thing it would be the rounded mag plate. I use a reloading tool and it took a minute to adjust from the flat bottom of the Glock mag to the rounded bottom of these.

Overall, they operated flawlessly.

I ordered an $8 dollar Glock mag disassembly tool from the Seattle 2-day company. Made it easier than using a punch. ;-)
great stuff guys!!

Posted by Jesus on Jul 13th 2020

great product & quality
Don’t try on a Gen 5 26

Posted by Brad on Jan 29th 2020

The product itself is wonderful. Very high quality springs and parts. Definitely a recommended upgrade from an awesome company.

Even though this is said to work with Gen 1-5. When I put this on my Gen 5 Glock 26 it barely fits due to the lip on the factory mag shaft. The upward spring pressure is also too much for the recoil spring to handle and it sticks while trying to return the slide into battery. Just skip this as an upgrade for this gun.
The good news is it works perfect on my Gen 4 19 MOS.
Bomb Diggity...

Posted by James Doyle on Jan 7th 2020

I installed these on some older mags. They were tired and needed a "refresh of springs." Wow. New springs, increased capacity, and made brand new mags out of old stock. So Happy...Great Product...Very secure on magazine...Exactly what I expected from Ghost. Thanks guys.
Very good item

Posted by Michael L Reed on Dec 12th 2019

Awesome mag extensions for the price , look cool too
Tough to load to capacity

Posted by Mike on Sep 26th 2019

While I did get at least 4-5 extra rounds it was tough to load to capacity. I also had some feed issues which I believe was due to the tension on the rounds. Brass would not eject with a round forced In behind it. Once I get rounds through this I’m sure the problem will fix itself.
The baseplate you've been looking for!

Posted by Colt on Sep 22nd 2019

I recently installed the Glock 9mm Magpul mag baseplates, the gen3 AR baseplates, the +6 Glock mag extension, and the gen 4 grip plug. It's easy to put on and HARD as hell to get off, like it should be. The parts are quality, and the mag extension spring has the correct tension. I own several different company's baseplates mainly for the aesthetics but also for function on mag stripping and what not. If I had found Ghost before I had bought them I would only own Ghost plates!