ANGEL 3.0 GEN 1-5 & X

Showing reviews 1-10 of 23 | Next

1. Solid Pull

   Posted by Logan on Nov 4th 2022

   added this to a glock 19 gen 5 and was surprised how much I liked this bar. it keeps a consistent pull weight while decreasing the slop in the trigger to leave a nice Crack at the end. will be installing this on other glocks

2. Get Ready!

   Posted by Kent on Oct 23rd 2022

   I have purchased 2 of the Ghost Angel 3.0 connectors. The best part of this connector is that it takes a lot of the creep out of the trigger and provides a crisp break. This connector is a big improvement for self-defense applications.

3. So good I bought TWO!!!

   Posted by Marcos on Mar 4th 2022

   After a great advise from Oliver, I installed this connector to my G17 Gen4 and 19X. Following the install video at Ghost site I was able to easily install and adjust them. The performance ever since is very noticeable, trigger pull is soft and consistent, light and crisp break.

4. The Angel Flies

   Posted by Liberty And Common Sense on Dec 1st 2020

   I received the Angel 3.0 promptly after ordering it. I installed it and had an issue with the trigger bar rubbing the frame. That night I messaged Ghost with my issue and disappointment. To my surprise 3 minutes after they opened the doors the following morning I received a call. This is the 2nd connector I had installed in this firearm and I did not have a fitment issue with the first. He told me to forget everything I know and asked: did you watch the video on connector adjustment? The what? No sir, send me the link. I knew it needed to be bent. The video revealed S.O.P adjustment. Easy breezy. This is not for "Wile E. Coyote" gun experts but the novice like me who is always learning. After adjusting back and forth a couple times I found the sweet spot. I was expecting a lighter pull. I wasn't expecting a slightly shorter take up. I love Glock, I don't like the trigger. I now have a trigger with a defined wall, less pre-travel, crisp break and short reset. My trigger gauge arrived Sunday and I am consistently pulling between 3 1/2 and 3 3/4. Concerning me personally, I have ended up with the perfect combination of pull weight and safety. I have the Angel 3.0 in combination with 4.5 striker spring and OEM trigger spring. I have put the 6# trigger spring and for me the factory trigger spring functions better. Thank you Oliver and Ghost Inc. Great product and great service.

5. he'll yea borther

   Posted by Michael Anthony on Jul 3rd 2020

   yeet.. if you have a gen4 glock swap the trigger bar with a gen3 trigger bar to get the real experience you're looking for.. ps: i used a p80 flat trigger with this connector and reduced the pull by 20%.. (removed all that empty space before the click, now it just goes *click* *click* *click*) super crisp reset its unlike any glock trigger.. also have one on my 19x which is a gen5 and its very similar but still has a little over travel compared to the gen3 p80 trigger.. tbh after the first pull it doesn't matter but that first pull might be all that matters in a real close encounter self defense situation.

6. Fix glock standard trigger

   Posted by Aaron Montreuil on Jun 15th 2020

   I put the angel 3.0 connector and springs in my glock 22. My trigger pulled an average of 6lbs 14oz before the small modification.. Now the trigger pulls a cleaner softer 3lbs 12oz ... I can handle that.. it has alittle grit still but that's just glock needing alittle polish of some time to break in.. I say go for it. Nice inexpensive fuc to help with that standard glock trigger BS.

7. Love how it feels in my G20 Gen 1

   Posted by Timothy E Ball on Jun 11th 2020

   I have tried few different connectors but the Angel 3.0 with spring kit has made this gun so easier to shoot, love it, i also bought for my G19 Gen 5 but neither of the 2 Angel 3.0 will not work in it and not sure how to male it work, when try to fire the firing pin doesnt go off so have to push in on slide release then firing pin goes off then can break back down

8. HOURS OF WORK SAVED

   Posted by WILLIAM T CARROLL on Feb 21st 2020

   The Ghost Angel is a drop in solution avoiding the need to fit and polish many different parts to get the same trigger performance. It is the very best connector on the market.

9. Best trigger pull ever

   Posted by Unknown on Jun 16th 2019

   What an improvement to the trigger feel. I would have never thought this was possible. My Glock 19 is so much more fun to shoot now.

10. Smooth trigger with no wall

    Posted by MB on Mar 11th 2019

    I installed this in a Gen3 and a Gen4. Worked beautifully in both and gave a great trigger feel. Installed it in a G45 and it would not release the striker. Called Ghost and was told due to manufacturing tolerances at Glock, it would work in some G45's and wouldn't in others. I was told to send it back and try an Edge in the G45.

Showing reviews 1-10 of 23 | Next